Aim MXG Dash Datalogger for Motorcycle Racing

£2,100.00

Brand Aim

The Aim MXG Motorcycle Racing Dash Data logger is a new dash logger from Aim designed to acquire and display data coming from your ECU, the internal accelerometer and gyro as well as from the GPS Module included in the kit. Performance and data acquired can also be incremented adding up to eight expansion modules. The Aim MXG has a compact 7" display and a high contrast TFT display identifies the MXG at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels.

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons.

Flexible Alarms

MXG feature configurable RGB alarm LEDs: you choose the conditions, you choose the colours.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.

Two Digital Outputs

MXG feature two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.
They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

Integrated Light Display

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised to your liking, and for each unique gear when required.

Expand The System According To Your Needs

Using the built-in CAN bus, you can add expansion modules to the MXG to increment the performance and the data acquired:

GPS Module

Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.

Channel Expansion

It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub

It adds 4 K thermocouples.

LCU-One Lambda Controller     

LCU-One Lambda Controller Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

SmartyCam HD cameras

The on-board cameras that overlays on videos the data sampled by your logger.

Memory Module

Thanks to the SD Card, Memory Module can record all your data in a file that can be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, can be connected via CAN-Bus to MXS/MXG and to all AiM loggers.

Race Studio 3 & Configuration

Race Studio 3 is the heart of your MXG.With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

WIFI Connectivity

Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.

MXG: 7” TFT
Resolution 800x480 pixels
Contrast MXS: 600:1
MXG: 1000:1
Brightness 700cd/m2 - 1,100 Lumen
Ambient light sensor Yes
Alarm LEDs MXS: 6 RGB freely configurable
MXG: 8 RGB freely configurable
Shift lights 10 integrated freely configurable RGB LEDs
CAN connections 3
ECU connections CAN, RS232 or K-Line
ECU compatibility + 700 industry leading ECUs
Expansion CAN connection GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller,
SmartyCam
Analog inputs 8 fully configurable, max 1,000 Hz each
Digital inputs 4 Speed inputs, lap signal, coil RPM input
Digital outputs 2 (1 Amp max each)
Accelerometer Internal Three-axial ± 5G + Three-axial Gyroscope
Internal memory 4 GB
Body Anodised Aluminium
Pushbuttons Metallic
Connectors 2 Motorsport connectors
Dimensions MXS: 169.4x97x23 mm
MXG: 237x127.6x26 mm
Weight MXS: 530 g
MXG: 950 g
Power consumption 400 mA
Waterproof IP65